Eaves Beams

Eaves beams manufactured any length, punched to your details TEL 0191 2672900 TO ORDER
Please note the angle of the Eaves beam below is shown with the bottom flange <90 degrees it can however be manufactured +- 5 degrees open or closed to suit the roof type or roof slope
  our  factory in based in Newcastle tyne & wear, it is here we manufacture several types of  eaves beams, we have several  purlin rollformers which are fully automatic so we can manufacture  z purlins, cladding rails and eaves beams very efficiently helping us keep our prices down, we have a weekly nationwide delivery service through out the Uk, we also have an urgent same/next day delivery service should you require them in a hurry
though we can manufacture infinite size eaves beams between 150-300mm we have two standards eaves beams which are as below
203mm  deep
254mm deep
ranging from  1.2-3.2mm in thickness.
The size of eaves beam you require will depend  on the load and span conditions which should be calculated by a qualified structural engineer (please see eaves beam properties chart below)
an example from  our eaves beam properties chart would be  203/E/1.6
which means a eaves purlin height =(203mm)
the shape =(E)
thickness =(1.6mm)

ICS eaves beams are Designed in accordance with BS5950 Part 5  Manufactured by cold roll forming of

Pre-hot dipped galvanised strip EN10147 Fe390 G275 with minimum Tensile strength of 390N/mm2

THESE ARE OUR STANDARD SIZES OF  EAVES BEAM , WE CAN MANUFACTURE OTHER SIZES  PLEASE RING FOR DETAILS

industrial roofing contractors newcastle - factory roofing - industrial roofing - industrial roofing contractors - industrial roofer - factory roofs - roofing and cladding - roofs - roofing sheets - z purlins